Milk Cooling Tank 50L

Tank Specifications:
Milk Cooling tank type-Open
Maximum capacity Liters-51
Weight (in Kg)-52
Number of Phases-1 Ph
Fan cooled Condensing unit type-AEΖ 9440Z L’Unite
Voltage-220V–240V,50Hz, 1~
Refrigerant type-R 449A
Refrigeration capacity Watt-835W,1/3Hp
Maximum Power Rate-580W
Run current-3.52Α
Maximum current-4.65Α
Number of milking-2

SKU: DMP1 Category: Tag:

Description

TANK SPECIFICATIONS:
Milk Cooling tank type-Open
Maximum capacity Liters-51
Weight (in Kg)-52
Number of Phases-1 Ph
Fan cooled Condensing unit type-AEΖ 9440Z L’Unite
Voltage-220V–240V,50Hz, 1~
Refrigerant type-R 449A
Refrigeration capacity Watt-835W,1/3Hp
Maximum Power Rate-580W
Run current-3.52Α
Maximum current-4.65Α
Number of milking-2

REFRIGERATION CAPACITY RATING CONDITIONS
• Ambient temperature: +32C
• Evaporator outlet and return gas superheated :11Κ
• Condensing temperature: +55C
• Evaporating temperature: 0C
• Temperature of refrigerant at condenser outlet is sub cooled within the condensing limits of the unit.

MILK COOLING TANKS TECHNICAL SPECIFICATIONS

CONSTRUCTION:

Stainless steel 18/10, DIN 1.4301 (AISI 304) for inner and outer tank vessel.

TANK TYPE:

Vertical type cylindrical tank, free standing, smooth inner sides, rounded angles, perfectly polished welding, adjustable legs for uneven floors. Direct expansion bottom designed to ensure total drain of tank.
The design of evaporator plates prevents milk freezing even at low milk volumes. Crash test 60BAR. Function pressure: 30BAR.
Fine insulation with precisely controlled infusion of high – density environment friendly polyurethane foam.
30rpm (90W) single-phase agitator motor for MPV50 – MPV1250, 30rpm (120W) single-phase agitator motor for MPV1500 – MPV2500, stainless steel lid without any screws inside and one-piece agitator (without joints). Automatic stop of the stirring motor when lid is open.
Milk inlet 200mm and stainless steel cover. Elevated parts (opening handle, stirring motor and electrical control panel) for easy cleaning. Milk outlet and milk cooling tank evaporator plate inclination according to the international standards (ISO 5708).
Stainless steel springs for easy opening and closing of the milk cooling tank lid (for MPV200 – MPV2500). Stainless steel dipstick and standard calibration chart. IP55 panel for electric instrument (Applicable Standard: EN 60529/91, Applicable directives: LVT 73/23/EEC). Stainless Steel Butterfly valve DN50, 52mm with one end nut, other threaded (male part), PVC cap and stainless steel chain.

CONDENSING UNIT:

Hermetically sealed condensing unit compressor made by L’Unite Hermetique, coolant type R449A (full ecological). For the protection and the condensing unit’s better performance have been mounted solenoid valve, high pressure switch, low pressure switch, high pressure switch for the second fun regulation (models MPV1000-MPV2500) on the refrigeration circuit.

INSULATION TYPE:

INTERVOL RFN-24.Two components polyurethane rigid foam system.
Blowing agent used is an HFC mixture.
Thickness: 45mm.Density: 40kg/m3 (DIN53420).Compressive strength: 20kPa (DIN53421).Thermal conductivity, 24C:0. 023 W/m.K (DIN18164).

PANEL FOR ELECTRIC INSTRUMENT: MATERIAL:

Two components polyurethane base elastomer. PROTECTION CLASS: IP 55
class-standard (Applicable Standard: EN 60529/91, Applicable directives: LVT 73/23/EEC).
TYPE: Tank mounted.

MILK CONTROLLER – THERMOSTAT:

OPERATING TEMPERATURE: +0 / +60C.
STORAGE TEMPERATURE: -30 / +85C.
POWER SUPPLY: 230V – 50Hz +/- 10%.
POWER ABSORPTION: 3VA max.
MAKE : DIXELL SRL, ITALY.

FUNCTION: When the compressor reaches the set point, it stops its function and the auto agitation of milk begins for 15 minutes pause, 3 minutes agitation and so on until the milk temperature be SET+ Hy when the compressor starts again. In case of probe failure , the output is according to parameter “COn” – Compressor ON time with faulty probe (range: 0 / 255min , val.15min) and “COF” ”
– Compressor OFF time with faulty probe (range: 0 / 255min , val.30min). Note: All of the milk controller parameters are adjustable.
DIPSTICK: High precision stainless steel dipstick (AISI 304) for easy and direct volume reading in mm.

TANK DIMENSIONS (in mm)

small cooling tank

Capacity-50 Liter
A=560
A1=280
A2=365
B=520
B1=280
B2=365
H=1350
h1=820
h2=1050
h3=440

Additional information

Weight 70 kg
Dimensions 56 × 52 × 105 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.